Burkert 8793 - Activating Diagnosis Functions

145
Auxiliary functions
26.2.22.4. Activation of diagnosis functions
In the ADD.DIAGNOSE menu several diagnosis functions are activated and incorporated into the DIAGNOSE
main menu.
Activatable diagnosis functions:
HISTOGRAM
Graphical display of the dwell time density and movement range.
SERVICE.TIME
Operating-hours counter
TRAVEL.ACCU
Path accumulator
CYCLE.COUNTER
Direction reversal counter
TEMP.CHECK
Temperature monitor
STROKE.CHECK
Monitoring of the mechanical end positions in the armature
PV.MONITOR
Process actual value monitoring (only for Type 8793, process control)
POS.MONITOR
Position monitoring
Table 76: ADD.DIAGNOSE; overview of diagnosis functions
The exact description can be found in Chapter “26.2.22.6. Description of the diagnosis functions”
ADD.DIAGNOSE
- Activating diagnosis functions:
Key Action Description
MENU
Press for approx. 3 s
Switching from process level setting level.
/ Select DIAGNOSE (To do this, the DIAGNOSE auxiliary function must already have
been activated by incorporation into the main menu (MAIN)).
ENTER
Press
The submenus are displayed.
/ Select ADD.DIAGNOSE
ENTER
Press
The other diagnosis functions are displayed.
/ Select required diagnosis
function
ENTER
Press
The required diagnosis function is now marked by a cross .
either
/ Select further diagnosis
functions
Keep repeating until all required diagnosis functions have been
marked with a cross
.
ENTER
Press
or
EXIT
Press
Acknowledgment and simultaneous return to the DIAGNOSE main
menu.
The marked diagnosis functions have been activated and the setting
menus are now in the DIAGNOSE main menu.
Table 77: Activation of diagnosis functions
english
Type 8792, 8793