Cleaning the Unit
4326 9562-007 3-13
Clean Ink off the Endorser Cartridge and Cartridge
Housing
If the unit is producing acceptable print quality for the endorsement, it is recommended that
this portion of the cleaning procedure – which cleans the ink cartridge print head – be
omitted. However, if the unit exhibits degraded print quality, it is recommended that the following
cleaning procedure be performed on the ink cartridge print head and ink cartridge housing.
IMPORTANT
The Burroughs enhanced ink cartridge (Burroughs Store part number
82-2120-984) greatly reduces or eliminates the requirement to clean the
cartridge print head in order to maintain print quality. Use of the legacy
cartridge (Burroughs Store part number 80-2120-873) may require periodic
cleaning of the cartridge print head. When using either ink cartridge, cleaning
of the print head should only be performed on an “as needed” basis.
1. Remove the cartridge from the unit. The following illustration shows cartridge
removal on Value and early Professional and Expert units.
To Next Page
Loading...