Product manual 2CKA001473B8291
8.6.3 Standby times
Fig. 14: Menu item – Standby times
Standby mode is not activated at the factory. The activation and adjustment (reduction) of the
temperature during absence can be activated or deactivated here.
Button Display Entry / Comments
Starting times
– Press the menu button for 2 seconds to switch to the
setting mode.
Special functions – Select menu "Special functions" via the arrow buttons.
Standby
– Press the OK button to select menu item "Standby times".
The default setting flashes.
On / Off – Set the standby times to ON or OFF via the arrow buttons.
On
– Confirm your entry with the "OK" button.
In the example the setting "On" has been selected.
Special functions
– Press the menu button to switch to menu level "Special
functions".
– Press the menu button again to switch to the operating
mode.
Table 4: Sequence of operating steps
To Next Page
Loading...
