Bush LED24265DVDCNTD - Sound and Source Controls; Sound Settings and Source Selection

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
General TV Operation
Sound & Source Controls
Conguring Sound Settings
Sound settings can be congured according to
your personal preferences.
Press “MENU” button and select the rst icon
by using “ ” or “ ” button. Press OK button
to view Sound Settings menu.
Operating Sound Settings Menu Items
Press “ ” or “ ” button to highlight a menu item.
Use “ ” or “ ” button to set an item.
Press “MENU” button to exit.
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer sub-
menu.
In the equalizer menu, the preset can be changed to
Music, Movie, Speech, Flat, Classic and User. Press
the “MENU” button to return to the previous menu.
NOTE: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.
Balance: This setting is used for emphasizing
left or right speaker balance.
Headphone: Sets headphone volume.
Sound Mode: You can select Mono, Stereo, Dual
I or Dual II mode, only if the selected channel
supports that mode.
AVL: Automatic Volume Limiting (AVL) function
sets the sound to obtain xed output level between
programmes (For instance, volume level of
advertisements tend to be louder than programmes).
Headphone/Lineout (optional): When you
connect an external amplier to your TV using
the headphone jack, you can select this option
as Lineout. If you have connected headphones
to the TV, set this option as Headphone.
Dynamic Bass: Enables or disables the Dynamic
Bass.
SRS TruSurround HD: Press “ ” or “ ” button
to set SRS TruSurround HD as on or off. If you
set SRS TruSurround HD as On, some features
in the Sound menu can be unavailable to be set.
Digital Out: Sets digital out audio type.
Conguring Source Settings
You can enable or disable selected source options.
The TV will not switch to the disabled source
options when “SOURCE” button is pressed.
Press “MENU” button and select Settings icon
by using “ ” or “ ” button. Press OK button
to view Settings menu. Select Source and press
OK button.
Select Sources in the Settings menu and press
OK button.
Press “ ” or “ ” buttons to select a source.
Use “ ” or “ ” button to enable or disable the
selected source. Changes are automatically stored.
Press RED button to edit the name of the selected
source.
To view general conguration preferences, select
Other Settings in the Settings menu and press
OK button.
31