To Next PageTo Next PageWhat to do if my BWT Water Dispenser shows CHECK and SALT?
If your BWT Water Dispenser displays 'CHECK' and 'SALT' alternately, it means either the salt tank is empty or the device has detected a regeneration issue. First, refill the salt tank. If the display persists even after refilling, it is recommended to contact technical support for further assistance.
Why is my BWT A6X not softening water?
If your BWT Water Dispenser isn't softening water effectively, with limescale returning, there could be several reasons. First, ensure the bypass is correctly positioned to direct water through the softener. Next, check and refill the salt tank if it's empty. Verify the salt type selected in the programming is correct and that the filter element isn't clogged—replace it if necessary. If issues persist, contact technical service.
What to do if my BWT A6X has no display?
If there's no display on your BWT Water Dispenser, it could be due to a power outage or an electrical/electronic failure. Begin by checking the power outlet to ensure it's working. If the outlet is functional and there's still no display, contact technical support.
General| Brand | BWT |
|---|---|
| Model | A6X |
| Category | Water Dispenser |
| Language | English |
