11.1 Troubleshooting
Fault Cause Action
Drop in water pressure Dirty filter screen Complete backwash and re-view
frequency setting
Flushing water outlet
does not close
Backwash element does not
reach the end position due to
large particles of dirt
Repeat backwash by turning pow-
er on and off
Display shows ERR Pressure too low 1. Check inlet pressure is
more than 350 kPa
2. Backwash
If the fault cannot be rectified by following these tips, contact your local Reece branch.
11 Maintenance
It is recommended and to assist in the longevity of
your Infinity unit, that regular maintenance occurs.
This should always be undertaken by specialist staff
who will also replace worn parts.
We advise you to conclude a maintenance contract.
Maintenance must be performed once each year,
and twice each year for municipal systems, by your
local plumber/installer.
To Next Page
Loading...
