Working sensor and its detection zone
When you reverse the vehicle, all the sensors will work.
Detection zones of sensors are given in
the figure. As the detection zones are
limited, be sure to check the
surrounding of the vehicle before
reversing the vehicle slowly.
① About 1,200 mm
② About 600mm
Sensors may fail to detect very close obstacles.
The parking assist system is only used for assisting you in parking and it
cannot be used as a substitute for your judgment. Make sure that the vehicle
is operated and controlled on the basis of observation.
Do not place accessories or other articles at the positions within the obstacle
detection scope of sensors, because doing so may affect normal work of the
system.
Under some conditions, the system cannot work normally. The system
cannot detect the obstacle when the vehicle approaches to certain objects.
For these reasons, be sure to observe the areas around the vehicle all the
time and do not rely on the system only.
To Next Page
