When transferring the vehicle, please hand over to a new owner
all documents delivered with the vehicle.
Do not modify or replace seats or trims of seats with side air
bags. These actions will prevent the side air bags from
deploying normally, cause the system to fail or side air bags to
deploy accidentally, resulting in severe injury or even life threat.
Do not disassemble or repair the A-pillar shield, roof, B-pillar
shield, C-pillar shield equipped with curtain air bags. These
actions will cause the system to fail or curtain air bags to deploy
accidentally, resulting in severe injury or even life threat.
Do not modify any components of the SRS, including
corresponding labels. Have any operation on the SRS carried
out by a BYD authorized service provider.
The air bag can only provide accident protection for one time.
Once the SRS is triggered or damaged, be sure to replace the
system.
When scrapping any component of the vehicle or its SRS,
please observe relevant safety regulations and scrapping
procedure.
The SRS has a strong resistance to electromagnetic
interference and disturbance around. However, to avoid
unexpected conditions, please do not operate the vehicle in an
environment with electromagnetism intensity beyond the limit
required by the country.
The SRS of the vehicle is designed with full consideration of the
common misuse and road conditions in the country. However, to
avoid unexpected conditions, please do not allow the bottom of
the vehicle to suffer impact or drive the vehicle violently in a
severe road condition.
The SRS of the vehicle has been fully verified and the original
wiring system matches the SRS perfectly. Any modification or
change to the vehicle wiring harness may cause the SRS to be
triggered in normal conditions or fail to be triggered when the
triggering conditions are met.
To Next Page
