iNetVu™ Service Manual Page 101 of 109
2. Raise the Mobile Platform to approximately 35 using the iNetVu™ Mobile
Software or the Handheld Controller. For more information regarding the use of
the iNetVu™ Mobile Software and its installation, please refer to the iNetVu™
System Manual.
3. Remove Reflector from the iNetVu™ Reflector Transportable Case.
4. Install Reflector as described in Appendix 2.
5. Congratulations! The iNetVu™ 12000 has been successfully assembled.
6. Completed iNetVu™ 1200 Mobile Platform
To Next Page
Loading...
