iNetVu™ Service Manual Page 49 of 109
4.2. Emergency Dish Stow
In the event that the iNetVu™ Mobile System experiences failure, there are 3 methods
available for stowing the dish. Assess your cause for failure and proceed with the
appropriate method.
1) STOW Button on iNetVu™ 5000/7000/9000 Controller
Communication with iNetVu™ Controller failure
PC or iNetVu™ Mobile Software failure
2) iNetVu™ Mobile Manual Controls
Sensor or switch failure (unable to automatically pinpoint ST indicator)
3) Direct connection to 12VDC Power Supply / iNetVu
TM
3000 Controller
iNetVu™ 5000 / 7000/ 9000 Controller failure
Solution(s):
Use the following steps to stow the dish in an emergency situation:
To Next Page
Loading...
