C-COM Satellite iNetVu - Inetvu Transportable Case Installation; 950 2-Pc Transportable Case

iNetVu™ Service Manual Page 93 of 109
4.14. iNetVu™ Transportable Case Installation
4.14.1. 950 2-pc Transportable Case
Required Materials:
 iNetVu™ Mobile Platform Transportable Case
 0.95m Reflector Transportable Case
 7/16” (12mm) Wrench
 ½” (13mm) Wrench
 Ty-wraps
Procedure:
1. Remove iNetVu™ Mobile Platform Transportable Case cover and open the 0.95m
Reflector Transportable Case.
2. Complete system wiring and connections for the iNetVu™ Mobile System according
to the System Wiring Diagram for your Satellite Modem / Service.
3. Raise the Mobile Platform to approximately 35 in Elevation.