iNetVu™ Service Manual Page 98 of 109
4.14.2. 950 1-pc Transportable Case
Required Materials:
iNetVu™ Mobile Platform Transportable Case
Procedure:
1. Remove iNetVu™ Mobile Platform Transportable Case cover.
2. Complete system wiring and connections for the iNetVu™ Mobile System
according to the System Wiring Diagram for your Satellite Modem / Service.
3. By hand, gently rotate the Reflector so that the Polarization is centered over the
Base Plate.
4. Congratulations! The iNetVu™ 950 has been successfully assembled.
To Next Page
Loading...
