7
Product keypad
E
G
A
B
C
D
F
A Indicator / Warning light
Red warning LED ashes with a short audible beep to inform the
operator that the product has reached the desired temperature
or is moving to the next cycle
B Water ow
Check hoses or clamps for kinks or occlusions
C Water level
Check water level
D Setpoints
Toggle through the four setpoints, temperature in C and F
E On/Standby button
Green indicates the unit is on / Yellow indicates power is supplied
to the unit but the unit is not on
F Therapy cycles
20 minute cycle, 30 minute cycle, or continuous cycle
G Setpoint lock
Prevents tampering of settings
Contact information
Contact C2Dx
®
Customer Service or Technical Support at 888-902-2239.
C2Dx
®
, Inc
555 E Eliza St, Ste A
Schoolcraft, MI 49087
USA
To view your operations or maintenance manual online, see www.c2dx.com/manuals
Have the serial number (A) of your C2Dx
®
product available when calling C2Dx
®
Customer Service or Technical
Support. Include the serial number in all written communication.
Introduction
101176 Rev 1 c2dx.com
To Next Page
Loading...
