CAB 5314 Series - Installation and Setup

12 13
6 Installation
6.1 Standard Settings Ex Factory
i
Notice!
Theapplicatorisadjustedinastandardcongurationbythefactory.Adjustmentswiththesevalues
guaranteeasmoothoperationwithsameconguration.
i
Notice!
In case of a customer setup with special material the adjustments can deviate from standard values.
Then the values in the setup protocol are valid.
The standard values for the settings ex-factory are:
- Connecting on a cab Hermes+ printer, vertical
- Used material for ex-factory settings: cab part No.: 5556472 54x35.5