A2+/A4+/A6+/A8+
Configuration
Edition 5/06 Configuration Instructions 27
Tab. 12:Parameters of the menu Setup > Status line
4.1.6 Security
Activating a PIN
By activating a PIN, you can protect the Setup menu, certain memory card functions and the firmware
update from unauthorized access.
The protected menu items are then marked with the symbol and are only accessible after the PIN is
entered.
1. Press the menu button.
2. Select Setup > Security > Security menu.
3. Select the value On with the X and W buttons
4. Accept the setting with the ↵ button.
Defining a PIN
1. Press the menu button.
2. Select Setup > Security > PIN menu.
3. Select the digit of the PIN to be changed with the X and W buttons.
4. Assign the selected digit a number with the S and T buttons.
5. Repeat these two steps for the remaining digits of the PIN.
6. Accept the setting with the ↵ button.
Input buffer Displays the current input buffer used in the form of a vertical bar. Off
Card access Icon displayed while an installed memory card is being accessed. On
Data transfer Displays the current data transfer in the form of a falling drop. On
Parameter Meaning Default
To Next Page
Loading...
