CAB a2+ - Memory Card Functions in the Offline Menu

60 Configuration Instructions Edition 5/06
Memory cards
A2+/A4+/A6+/A8+
8.4 Memory card functions in the offline menu
Accessing the Memory card menu is only possible if a memory card is installed.
You can still only operate the card slot set in the menu Interfaces > Default card slot via the
operating panel (see "4.1.4" on Page 25). When operating via an interface, each card slot can be
addressed via a path.
8.4.1 Loading label
You can print labels whose descriptions are saved on the memory card using the Label from card
function.
1. Select the Label from card function in the Memory card menu.
2. Press the ↵ button.
The name of the label found at the top of the index of the card is displayed.
3. Select the desired label in the index of the card with the S and T buttons.
4. Press the ↵ button.
If you have selected a label which was saved with a fixed label quantity, the print job is started imme-
diately.
For label descriptions with a variable label quantity, you are requested by the display to enter the label
quantity .
If additional input on the label description is required, the display requests you to enter the variable
data .
5. Enter the label quantity/variable data with the following buttons:
W cursor left
X cursor right
S increase value at cursor position by 1 or select next letter in alphabet
T decrease value at cursor position by 1 or select previous letter in alphabet
6. Press the ↵ button briefly to confirm the input and start the print job.
Canceling input:
You can cancel the selection of the label and the label quantity at any time by pressing and holding the
↵ button (at least 2 seconds).
8.4.2 Printing card index
You can print out the index of the installed memory card with the Print directory function.
1. Insert printable medium (labels, endless paper) which extends across the entire printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
3. Press the menu button.
4. Select the Print directory function in the Memory card menu.
5. Start printout with the ↵ button.
The printout contains:
• the name of the memory card
• information on the saved files
• the size of the available memory area