A2+/A4+/A6+/A8+
Test functions
Edition 5/06 Configuration Instructions 41
5.4 Font list
The Font list function prints the most important parameters of the fonts available in the printer in tab-
ular form. The table contains both the original fonts in the printer and other fonts loaded into the printer.
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
1. Insert printable medium (labels, endless paper) which extends across the entire printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
3. Press the menu button.
4. Select Test > Font list menu.
5. Start printout with the ↵ button.
You can cancel the printout with the cancel button.
Fig. 14: Font list
The parameters have the following meaning:
Tab. 18:Parameters of the Font list
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Column Meaning
No. ID number of the font required for programming (command T).
Name Name with which the font is saved internally.
Type Type of font generation. It provides information on the variability of the font and is
important when programming (command T).
Description Explanations of the font: size, font family. The printout occurs in the appropriate
font.
To Next Page
Loading...
Need help?
General
