31
5 Test Functions
5.9 Event Log
Access only with service key inserted!
The label printer saves the following events in the Event log:
• Hardware fault
• Printhead replacement
• Firmware updates
• Resetting of the service counters
The printout occurs using the heat level and print speed specied in the Setup > Print param. menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert service key into a USB master interface.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start Ofine menu.
Select Test > Event log.
Event log
Mon Sep 26 15:41:57 2011
EOS1/300
Firmware V4.02 (Sep 26, 2011) - #170110417590
Date Description
06.05.11 14:06 Clear service counters
31.05.11 08:53 Firmware update -> V4.00 (0000)
14.07.11 14:03 Firmware update -> V4.01 (0000)
25.08.11 11:12 New printhead, 8 dots/mm, #04-007
06.09.11 14:39 New printhead, 12 dots/mm, #0X-01024
09.09.11 14:47 Clear service counters
26.09.11 14:03 Firmware update -> V4.02 (0000)
Fig. 17 Event log
To Next Page
Loading...
Need help?
General
