CAB HERMES Q Series User Manual

24 24
Wi-Fi

Access only with Wi-Fi stick installed.
Parameter Meaning Default
Wi-Fi Activation of the Wi-Fi interface Off
> Operation mode Selection of the operation mode
Connect to network:
Connection of the printing to an existing wireless network
Hotspot:
Installation of an printer-own wireless network to connect mobile devices
to the printer
Connect to
network
Operation mode Connect to network
>> Access-Point Selection of the Access Point to setting up the Wi-Fi connection. -
>> DHCP
 Ethernet > DHCP
On
>>> IP adress
 Ethernet > IP adress
-
>>> Netmask
 Ethernet > Netmask
-
>>> Gateway
 Ethernet > Gateway
Off
>>>> Gateway address
 Ethernet > Gateway address
-
>>> DNS-Server
 Ethernet > DNS-Server
-
Operation mode Hotspot
>> Hotspot SSID Name of the printer-own wireless network generated
of the OEM
name and
the last six
digits of
the MAC
address
>> Hotspot password Password of the printer-own wireless network hotspot!
>> Hotspot info Display of the IP adress of the hotspot, the SSID and the password
Display of a QR code, which can be scanned with a mobile device to
connect the device to the printer-own wireless network
-
Table 12 Parameters of the Setup > Interfaces > Wi-Fi menu
6 Conguration

CAB HERMES Q Series Specifications

General

Brand	CAB
Model	HERMES Q Series
Category	Label Maker
Language	English