CAB HERMES Q Series User Manual

58 58
13.5.2 Print File List
The Print le list
functioncreatesalistofthelesstoredonthedefaultstoragedevice.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Storage > Print le list
The display shows the selection of storage devices
 Selectastoragedeviceandconrmwith .
The directory of the storage device will be printed.
Contents of the printout:
• the name of the storage device
• informationonthesavedles
• the size of the available memory area
13.5.3 Copy Files
With the Copy lesfunctionlescanbecopiedfromonetoanotherstoragedevices.
 Insert the storage devices.
 Start menu.
 Select Storage > Copy les.
Under the headline Source the selection of storage devices will be shown.
 Select source device.
 Select a folder.
 Selectles.Onesingleleorallles(*.*)ofthefoldercanbeselected.
 Conrmtheselectionwith .
Under the headline Destination the selection of storage devices will be shown again.
 Select destination device and folder.
 Conrmtheselectionwith .
Thelesarecopied.Thedisplayshowsthemessage"Copied ... le(s) to [Destination]"
 Select Continue to return to the Storage menu.
13.5.4 Format Storage
The Format function can be used to delete all data from a storage device. This reformats the storage device. So you
can also use the Format function if the Unknown card error message appears when using the device.
 Insert storage device
 Start menu.
 Select Storage > Format storage.
IfthefunctionisprotectedviaaPINapromptappearsinthedisplay.EnterthecodenumberandconrmwithOK.
The display shows the selection of storage devices.
 Selectastoragedeviceandconrmtheselectionwith .
The display shows the message All data on the selected device will be lost.
 Select Continue. The storage device will be formatted.
Do not remove the device from the printer during the deleting procedure.
The printer returns to the Storage menu.
13 Storage Devices

CAB HERMES Q Series Specifications

General

Brand	CAB
Model	HERMES Q Series
Category	Label Maker
Language	English