8 8
2 Connecting Label Printer to Computer
2.4 Setting Up a Wi-Fi Connection
2.4.1 Connecting Printer to Network
Access only with service Wi-Fi stick installed.
Note!
That mode allows to use an existing wireless network for controlling and conguring the printer and for
sending print jobs to the printer.
Start menu.
Select Setup > Interfaces > Wi-Fi.
Activate Wi-Fi page 23.
Select Operation mode > Connect to network.
Select Access-Point.
The search for access-points will be started.
The display shows the available access-points including the hidden access-points.
Selectanaccesspointanconrmwith .
For hidden access-points enter the SSID.
Setup DHCP or IP and Mask and if necessary Gateway.
If the network is protected a prompt to enter the passkey appears in the printer display. Enter the passkey and
select
.
Set up print service if necessary 2.1 on page 7.
Adjust Windows printer setting 2.2 on page 7.
Attention!
Do not change the settings of the "IP" and "Gateway" on the printer web interface, as otherwise the
connection to the printer may be lost.
To Next Page
Loading...
Need help?
General
