Calculated Industries 6425 - Calculating Volume Using a Fixed Height

User’s Guide — 23
Calculating Volume Using a Fixed Height
To set or program a fixed height, for example, eight feet seven inches,
do the following:
Step Key
Enter program mode [Set] [H]
The Feet-Inch annunciator will start flashing. Press [M+] if you
want to change the units of measurement.The display will
scroll through the various units of measurement. Press [Set] to
select the unit of measure and begin storing.The first zero (0)
will start flashing.
Accept Feet-Inch as Units [Set]
Enter 8 feet [M+] (press eight times)
([M-] to subtract)
Store measurement [Set]
Enter 7 inches [M+] (press seven times)
([M-] to subtract)
Store height/depth [Set]
Clear display [RESET]