Calculated Industries ElectriCalc Pro User Manual

User's GUide — 33
KEYSTROKE DISPLAY
2. Set to 90º C:
(90º) 1 Ø 90 1 PH
3. Set to Copper (if necessary):
(Cu/Al) 1 Ø 90 Cu 1 PH
4. Enter VA:
 VA 47,700.
5. Enter Volts:
 VOLT 240.
6. Find Amps:
 AMPS 198.75
7. Find Wire Size:
 AWG 000 CU WIRE SIZE
8. Change Ambient temperature:
(Ambº) 1Ø 90 Cu Amb AMB° 20. ºC
9. Find adjusted Wire Size:
 AWG 00 CU WIRE SIZE
10. Display Wire Ampacity:
 ØØ* 210.6 WIRE A
* The Wire Size will be shown in the upper left area of the display when
displaying the Wire Ampacity rating.
11. Display CMIL:
 CMIL 133,100. WIRE
12. Display NEC table:
 NEC 310.15.b.16
13. Reset Ambient Temperature and Clear:
 1Ø 90 Cu 0.

Calculated Industries ElectriCalc Pro Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Yellow
Digits	8 digits
Display type	LCD
Display tilting	No
Display size (HxV)	15.88 x 63.5 mm
Display number of lines	- lines
Display size (HxV) (imperial)	0.625 x 2.5 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	16 mm
Width	76 mm
Height	142 mm
Weight	127.5 g