Calculated Industries ElectriCalc Pro - Motor Keys

User's GUide — 7
(cont’d)

milli- — Used with Watts, Amps, Volts, and
Volt-Amps keys to identify “milli-” values.

Amps — Enters or calculates Amps (using Volts
and VA or Watts).

Volts — Enters or calculates Volts (using
Amps, HPth, and VA or Watts). Default value
is 240 Volts.

Volt-Amps — Enters or calculates Volt-Amps
(using Amps, Volts and Horsepower or Watts).

Watts — Enters or calculates Watts (using Amps,
Volts, and VA or Horsepower).

DC Amps (Idc) — Enters or calculates DC Amps
(using DC Volts and Resistance).

DC Volts (Vdc) — Enters or calculates DC Volts
(using DC Amps and Resistance).

DC Resistance (R) — Calculates and displays
DC Resistance in Ohms (using DC Volts and
DC Amps).

Power Factor (PF%) — Enters or calculates
Power Factor percentage (based on Watts
and VA). Default value is 100%. Entered or
calculated Power Factors greater than 100%
will result in an error.

Theoretical Horsepower — Enters or calculates
Theoretical Horsepower (based on Amps, VA,
Watts, Efciency%, PF%, and/or Volts). 1.0 HPth
correlates to 746 Watts at 100% Efciency.