Page 26 - Manual FA01731-EN - 01/2023 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Saving users
All save user operations must be performed only on the control board set as the MASTER.
Operating modes
1
MASTER OPENING command
Only the operator configured as the MASTER will open.
The open gate button on the transmitter must be stored on channel CH1 on the gearmotor.
2
Open command
Both the MASTER and SLAVE operator open.
The open both gates button on the transmitter must be stored on channel CH2 on the gearmotor.
BY 3500T
BY 3500T
MASTER
MASTER
MASTER SLAVE MASTER SLAVE
1
2
To Next Page
Loading...
Need help?
General
