CAME FA40230CB User Manual

ESC < > ENTER
a3
ESC < > ENTER
i
SC <
C
SC
<
<
> EN
EN
>
>
ESC < > ENTER
cl i
ESC < > ENTER
cl2
ESC < > ENTER
op2
ESC < > ENTER
op I
M2
M1
M2
M1
M2
M1
M2
M1
Page 26 - Manual code: 119DW02EN vers. 3 03/2014 © CAME Cancelli Automatici S.p.A. - The data and information provided in this manual are subject to change at any time without prior notice by CAME Cancelli Automatici S.p.A.
Select A 3.
Press ENTER to confirm.
Select 1 and press ENTER to confirm the automa-
tion run calibration operation.
The leaf of the first gearmotor will perform a closing
manoeuvre to the end run...
...the leaf of the second gearmotor will then perform
the manoeuvre...
...the leaf of the second gearmotor will then perform
an opening manoeuvre to the end run...
...the leaf of the first gearmotor will then perform
the same manoeuvre.
Run calibration
N.B. before calibrating the run, check that the manoeuvre area is free from any obstacle and check for the presence of one mechanical end stop for
opening and one for closing.
Important! During calibration, all safety devices will be disabled except for the TOTAL STOP device.
www.metalines.com
sales@metalines.com

CAME FA40230CB Specifications

General

Brand	CAME
Model	FA40230CB
Category	Gate Opener
Language	English