Canon 3230 - Periodic Inspection of the Breaker; Checking the Breaker

xxxi
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Be sure to test the breaker
once or twice a month using the following procedure.
Make sure that the main power is turned OFF, before inspecting the breaker.
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
Checking the Breaker
1 Push the test button on the rear of the machine with the tip of a ball-point
pen, or a similar object.
Briefly push the test button.
The breaker is located on the rear of the machine.
For more information on the location of the breaker, see “External View,” on p. 1-10.
•
•
•
•