Finisher-S1/Puncher Unit-R1 (Optional)
2-30
2
Routine Maintenance
Finisher-S1 /Puncher Unit-R1 (Optional)
This section describes the procedure for replacing the staple cartridge in the optional Finisher-S1,
and removing punch waste from the optional Puncher Unit-R1.
Replacing the Staple Cartridge
When the optional Finisher-S1 is almost out of staples and the staple cartridge must be replaced,
a screen similar to the one shown below appears on the touch panel display. Follow the procedure
described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs
out.
To Next Page
Loading...
