Finisher-S1/Puncher Unit-R1 (Optional)
2-33
2
Routine Maintenance
Use only staple cartridges intended for use with this machine.
Do not remove the seal that holds the staples together before you place the staple cartridge into the staple
case.
Only one staple cartridge can be inserted at a time.
6
Remove the seal holding the staples together, by pulling it straight out, and
then down.
053(
Make sure that you pull the seal straight out, and then down. If you pull it out at an angle, it may tear.
7
Gently push the staple case back into the finisher until it is securely in
place.
•
•
To Next Page
Loading...
