123
Troubleshooting Guide
The film does
not rewind
automatically.
The < >
icon blinks
on the LCD
panel.
The temperature is cold, and it has suddenly affected the
battery level.
Replace with a new battery. (
→p.19) Keep a spare battery
on hand and warm the battery in your pocket alternately.
(
→p.7)
C.Fn-1 is set to 1 or 3.
Set C.Fn-1 to 0 or 2. (
→p.98)
The battery level is very low.
Replace the battery with a new one. (
→p.19)
A misoperation has occurred with the camera, lens, or
Power Drive Booster.
Remove and reload the battery. (
→p.19, 116) If the < >
icon stops blinking, picture-taking is possible. If it is still
blinking, consult your nearest Canon Service Center.
SEC.09 P119-142 (E) 29-01-2003 12:40 Pagina 123
To Next Page
Loading...
