Canon EOS-1V HS User Manual

21
Mounting and Detaching a Lens
Mounting a Lens
Detaching the Lens
1
Remove the caps.
• Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
2
Attach the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
Red dots
3
On the lens, set the focus mode
switch to AF.
• If the focus mode switch is set to MF
(or M on older lenses), autofocus will
not operate.
4
Remove the front lens cap.
While pressing the lens release
button, turn the lens as shown by
the arrow.
• Turn the lens until it stops, then
remove the lens.
• Be careful not to lose the lens caps and body cap.
• AF stands for autofocus.
• MF or M stands for manual focus.
1
2
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 21

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5