Canon EOS-1V HS User Manual

76
Bulb Exposures
When bulb is set, the film is exposed during the time you keep pressing the
shutter button completely. Bulb is useful when a long exposure is
necessary for capturing night scenes, fireworks, the night sky, etc.
1
While pressing the < >
button, turn the < > dial until
is displayed. Then release
the < > button.
2
Set the < > switch to < >, then
turn the < > (or < >) dial to
set the desired aperture.
3
Start the bulb exposure.
The elapsed exposure time will be
displayed on the LCD panel.
• The bulb exposure will continue while
you keep pressing the shutter button
completely.
Minutes
Hours
Seconds
Bulb exposures consume almost no battery power.
Connecting the separately-sold Remote Switch RS-80N3 (with shutter release
lock) or the Timer Remote Controller TC-80N3 to the camera’s remote control
terminal will free you from pressing the shutter button during bulb exposures.
SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 76

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5