Canon EOS-1V HS User Manual

73
Setting the Film Speed Manually
The manually-set film speed will be canceled the next time DX-coded film is
loaded.
C.Fn-3 can prevent the manually-set film speed from being canceled the next
time DX-coded film is loaded. (→p.99)
C.Fn
If the film is not DX-coded or if you want to set a different ISO film speed,
you can load the film and set the ISO film speed manually.
• The ISO film speed can be set manually from 6 to 6400.
1
Press and hold down the < >
button and < > button
simultaneously.
The icon and the currently-set film
speed will be displayed.
2
Turn the < > dial until the
desired film speed is displayed on
the LCD panel.
• With DX-coded film, the difference in
stops relative to the correct ISO
speed is displayed.
3
Release the two buttons.
The film speed will then be set.
Manually-set
ISO film speed
Difference
relative to the
correct ISO film
speed
This sample display indicates
that ISO 400 film has been
manually set to ISO 800. This
is also displayed when the
film starts rewinding and until
the film cartridge is taken out.
SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 73

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5