Canon EOS-1V HS User Manual

27
Loading and Unloading Film
Press the < > and < > buttons
simultaneously.
The LCD panel will display the
icon and the film speed.
Setting the Film Speed
• If the film is not loaded properly, the film transport indicator < > will blink
and the shutter will not work. Reload the film properly.
• Infrared film can also be used. (→p.82)
If the film speed displayed does not match the film speed or if the film is not DX-
coded, see “Setting the Film Speed Manually” on page 73.
In hot and humid environments, do not remove the film packaging until you are
ready to load the film.
The frame counter can either count up or count down. (C.Fn-8-1→p.103)
C.Fn
C.Fn 3 can prevent the ISO film speed from being set automatically with the
DX code. (→p.99)
C.Fn
The camera sets the film speed automatically within ISO 25 - 5000 with the
film's DX code.
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 27

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5