57
Shutter Speed-Priority AE
3
Press the shutter button halfway
and focus the subject.
The shutter speed and aperture will
be displayed.
4
Take the picture.
• As long as the aperture display is not
blinking, a correct exposure will be
obtained.
• If the lens’ maximum aperture (smallest f-number like
f/1.4) blinks, it indicates underexposure.
Turn the < > dial to set a slower shutter speed until
the aperture display stops blinking.
• If the lens’ minimum aperture (largest f-number like f/22)
blinks, it indicates overexposure. Turn the < > dial to
set a faster shutter speed until the aperture display stops
blinking.
Exposure Warnings
C.Fn-16 enables the safety shift feature. (→108)
In the shutter speed-priority AE mode, if a correct exposure cannot be
obtained with any aperture set by the camera, the camera automatically sets
a faster or slower shutter speed. This feature is called safety shift.
C.Fn-6 enables the shutter speed to be set in full-stop or 1/2-stop increments
instead of the standard 1/3-stop increments. (→102)
To Next Page
Loading...
