Canon EOS-1V HS User Manual

Single-Frame and Continuous Shooting
78
When , , , , or Blinks
If the battery power drops in cold
temperatures or the film advance operation becomes slow, it means that
the camera is trying to provide film advance power rather than speed. This
feature is called automatic film advance transmission. If this is activated,
one of the film advance icons ( , , , , ) will blink on the
LCD panel.
This feature is canceled when you press the < > button and < >
button simultaneously or when you replace the film or battery. If this feature
is in effect, check the battery power (→p.20) and follow the respective
countermeasures.
• If film advance or rewind stops midway, will blink on the LCD panel.
When the battery is replaced with a
new one, film advance will resume. Or, to resume film rewind, press the
Maximum Continuous Shooting Rates
Configuration
EOS-1V
EOS-1V + BP-E1
EOS-1V + PB-E2
(EOS-1V HS)
EOS-1V
+ Power Drive
Booster E1
Power Source
2CR5 lithium battery
Size-AA alkaline batteries x 4
Nickel Hydride Pack
NP-E2
Size-AA alkaline
batteries x 8
Size-AA alkaline
batteries x 8
Film
Advance
Mode
One-Shot AF
+ Manual Focus
3.5
10
7
3
6
3
6
3
AI Servo AF
3
9
7
3
5
3
5
3
In frames/sec. (approx.)
No viewfinder information is displayed during continuous shooting.
SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 78

Canon EOS-1V HS Specifications

General

Film Format	35mm
Flash Sync Speed	1/250 sec
Viewfinder Coverage	100%
Built-in Flash	No
Weight	945g (body only)
Type	SLR
Lens Mount	Canon EF
Shutter Speed	30 - 1/8000 sec, Bulb
ISO Range	6 - 6400
Metering Modes	Evaluative, Partial, Spot, Center-weighted Average
Focus Modes	One-Shot AF, AI Servo AF, Manual
Focusing System	45-point AF system
Continuous Shooting	10 fps
Battery	2CR5