Canon EOS-1V HS - Custom Functions: C.Fn-2 Film Leader Position; Custom Functions: C.Fn-3 DX-Coded Film Speed Setting

99
Custom Function Settings
Film leader position
When the film rewind is completed, you can leave out the film leader.
C.Fn-2-1:
This is convenient if you develop your own film.
C.Fn
C.Fn-2
Function
Film leader position
No.
0
1
Rewinds film leader into the
cartridge.
Leaves film leader outside the
cartridge.
Description
C.Fn-2
With C.Fn-2-1 set, the shutter speed will always be 1/8000 sec. when you
release the shutter with the camera back open.
DX-coded film speed setting method
This can prevent the camera from automatically setting the ISO film speed.
C.Fn-3-1: This enables you to set the film speed manually. (
→p.73) This
ensures that the desired film speed is set.
You need not
keep setting the film speed manually each time you load the
film.
C.Fn
C.Fn-3
Function
Automatic setting of
DX-coded film speed
No.
0
1
Enabled
Disabled
Description
C.Fn-3
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 99