98
Connecting via WPS (PIN Mode)
8
Select [Auto setting].
Select [Auto setting] and press
<0>.
Select [OK] and press <0> to
display an image on the card.
The camera’s <k> lamp will light up
in green.
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 136.
9
Select the image(s) to send.
Select and send image(s). For
information on how to send images,
see page 104.
The settings for connecting to a Web service are now complete.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
To Next Page
Loading...
