Canon EOS 2000D - Reconnecting

108
The camera can reconnect to a Web service for which connection
settings have been registered. The connection to the access point only
has to be established once. You do not need to establish a new
connection for each Web service.
1
Select [Wi-Fi function].
 Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [m].
 Select [m] (Upload to Web service)
and press <0>.
3
Select a Web service.
 Select a Web service and press
<0>.
 When the [Send to] screen (p.103) is
displayed, select a destination and go
to step 4.
4
Select [Connect].
 When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
 Select [Connect] and press <0>.

On the confirmation dialog, select [ OK ].
 The camera will reconnect to the Web
service.
Reconnecting