124
You can customize a Picture Style by adjusting individual parameters
such as [Sharpness] and [Contrast] from the default. To see the
resulting effects, take test shots. To customize [Monochrome], see
page 126.
1
Select [Picture Style].
Under the [z2] tab, select [Picture
Style], then press <0>.
The Picture Style selection screen will
appear.
2
Select a Picture Style.
Select a Picture Style, then press the
<B> button.
3
Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
4
Set the parameter.
Press the <Y> <Z> keys to adjust
the parameter as desired, then press
<0>.
Press the <M> button to save the
adjusted parameters. The Picture
Style selection screen will reappear.
Any parameter settings different from
the default will be displayed in blue.
A Customizing Image CharacteristicsN
By selecting [Default set.] in step 3, you can revert the parameter
settings of the respective Picture Style to their defaults.
To shoot with the Picture Style you adjusted, follow step 2 on page 93 to
select the adjusted Picture Style, then shoot.
To Next Page
Loading...
