73
In Basic Zone modes, when the shooting function settings are
displayed, you can press the <Q> button to display the Quick Control
screen and can set the functions shown in the table on the next page.
1
Set the Mode Dial to a Basic Zone
mode.
2
Press the <Q> button (7).
The Quick Control screen will appear.
3
Set the desired function.
Press the <S> cross keys to select a
function. (This step is not necessary
in the A mode.)
The settings of the selected function
and Feature guide (p.55) will appear.
Press the <Y> <Z> keys or turn the
<6> dial to change some of the
settings.
You can also select from a list by
selecting a function and pressing
<0>.
Q Quick Control
To Next Page
Loading...
