Canon EOS 3000D - Page 293

293
Troubleshooting Guide
 If [53: Wi-Fi] is set to [Enable], the camera cannot be connected to a
printer with an interface cable. Set [Wi-Fi] to [Disable], then reconnect
the camera to a printer with an interface cable.
 Contents displayed on the screen vary depending on the printer. This
instruction manual lists all the printing effects available (p.244).
 Install the EOS software on the computer (p.311).
 If [53: Wi-Fi] is set to [Enable], the camera cannot be connected to a
computer. Set [Wi-Fi] to [Disable], then reconnect the camera to a
computer with an interface cable.
Printing-Related Problems
I cannot connect the camera to my printer.
There are fewer printing effects than listed
in the instruction manual.
Computer Connection Problems
I cannot download images to a computer.