7
Quick Start Guide
6
Focus on the subject (p.47).
Look through the viewfinder and
aim the viewfinder center over the
subject.
Press the shutter button halfway, and
the camera will focus on the subject.
If the <I> icon blinks in the
viewfinder, raise the built-in flash
with your fingers.
7
Take the picture (p.47).
Press the shutter button completely
to take the picture.
8
Review the picture.
The captured image will be
displayed for approx. 2 sec. on the
LCD monitor.
To display the image again, press
the <x> button (p.82).
To shoot while looking at the LCD monitor, see “Live View
Shooting” (p.137).
To view the images captured so far, see “Image Playback” (p.82).
To delete an image, see “Erasing Images” (p.228).
To Next Page
Loading...
