Canon EOS A2 - Page 38

5) Compose the picture and press the shut-
ter button halfway to confirm the expo-
sure.
* The correct exposure value for the des-
The image was removed due to ignated depth of field and the corre-
copyright restrictions sponding shutter speed are displayed
in both the viewfinder and LCD panel.
Ifyou remove your finger from the shut-
ter button the display changes to “dEP”
and the aperture value.
* Ifdesired you can change the aperture/
shutter speed combination by turning
the main dial (refer to page 33).
6) Press the shutter button completely to
take the picture.
If the aperture value blinks, the desired depth
of field cannot be obtained. Use a wide-angle
lens or move farther from the subject and re-
peat steps 3 through 5.
38