Canon EOS A2 - Image Zone Shooting Modes

7. Image Zone Shooting Modes
Image zone shooting modes automatically
set all camera functions such as metering,
film winding and AF mode to the optimum
senings appropriate for the selected mode.
e When using an external flash unit in an
image zone mode, the picture may not
turn out as expected. Do not use an exter-
nal flash unit with image zone modes.
Ifthe shutter speed set by the image zone
mode falls below "1/focal length of the
lens in use,” the beeper sounds (2 beeps
per second) to warn of possible blurring
due to camera shake.
e Refer to page 57 for the function settings
in each mode.
O (Full Auto)
This setting allows you to take pictures in any
situation with point and shoot simplicity. Fo-
cusing, exposure and film winding are all set
automatically.
e Red-eye reduction operation is possible
with the built-in flash (refer to page 28).
AF mode automatic switching
function
In Full Auto mode, the camera senses the
subject movement and automatically sets
One-shot AF if the subject is stationary or Al
Servo AF if the subject is moving (refer to
Page 21).
e When the camera switches to Al Servo AF
mode, the in-focus indicator does not
function.
e Once the camera switches to Al Servo AF
mode, it will not switch back to One-shot
AF mode.
41