Canon EOS A2 - LCD and Battery Information

2. Release the shutter once.
If the battery indicator stops blinking, the prob-
lem is corrected and you can continue using
the camera normally. If the blinking does not
stop, the camera needs to be examined by an
authorized Canon service facility.
3) Lithium Battery Information
Always check the battery at the following times:
1. When loading a new battery
2. After lengthy storage
3. If the shutter will not release
4. In cold weather
5. Before an important shooting assignment
Battery Use Information
© Wipe the battery terminals with a clean, dry
cloth to ensure proper contact.
© The battery may explode or cause burns if dis-
assembled, recharged, shorted, exposed to
high temperatures, or disposed of in fire. Be
sure to observe all precautions indicated on
the battery package. Always keep it out of the
reach of children.
© Battery performance deteriorates slightly in
temperatures below 32°F/0°C. Keep the
camera and especially a spare battery close to
your body or in an inside pocket to keep it
warm until use.
e Remove the battery if you do not expect to use
the camera for more than three weeks.
4) Camera Operation with a Low Battery
Even if the battery indicator blinks or does not ap-
pear in the LCD panel during battery check, expo-
sure will be okay as long as the shutter releases.
Film advance and rewind will be impaired by in-
sufficient battery power. If winding or rewinding
stops due to the battery, the film cartridge symbol
will blink. Film transport resumes after a new bat-
tery is loaded and the film rewind button pressed.
65