Canon EOS A2 - Page 67

Multiple Exposures: Up to nine exposures can be
preset.
Exposure Compensation: +2 stops in 1/2-stop incre-
ments.
Auto Exposure Bracketing: +2 stops in 1/2-stop in-
crements. Three continuous exposures are taken in
sequence: one at the standard metered value, one
under, and one over.
FILM TRANSPORT
Film Speed Setting: Automatically set according to DX
code (ISO 25-5000) or set by user (ISO 6-6400).
Film Loading: Automatic. Film automatically advances
to first frame when back cover is closed.
Film Wind: Automatic using dedicated miniature
motor. Three modes are available: single exposure,
continuous exposure (3 fps maximum) and high-
‘speed continuous exposure (5 fps maximum).
Film Rewind: Automatic rewind at end of roll using
dedicated miniature motor.
OTHER
Self-timer: Electronically controlled with 10-second
delay.
Custom Function Control: Sixteen built-in custom
functions selectable by user.
POWER SOURCE
Battery: One six-volt lithium battery (2CRS).
Battery Check: Battery automatically checked when
command dial moved to position other than "L". Bat-
tery condition indicator displayed on LCD panel.
SIZE
Dimensions: 154 (W) x 120.5 (H) x 74.2 (D) mm
6-1/16" (W) x 4-3/4" (H) x 2-15/16" (D)
Weight: 664 gr/23.4 oz without battery (body only)
BUILT-IN FLASH
Type: Retractable type TTL automatic zoom flash
housed in pentaprism. Bypass control system.
Guide Number (ISO 100, m): 13 (28mm) to 17 (80mm)
Flash Coverage Angle: Automatically zooms to cover
the field of view of 28mm, 50mm and 80mm focal
lengths.
Recycling Time: Approx. 2 sec.
Flash Control Aperture: Automatically set by TTL pro-
gram in program modes. Manually set by user in
aperture-priority AE, manual exposure and X
modes. Automatically set according to ambient light
conditions and manually-set shutter speed in shut-
ter-priority AE mode.
X-sync Shutter Speed: Automatically set to 1/60~1/
200 sec in program modes according to TTL flash
AE program. Automatically set to 30~1/200 sec in
aperture-priority AE mode according to ambient
light conditions. Manually set to 1/200 sec or slower
in shutter-priority AE and manual exposure modes.
Manually set to 1/60, 1/90, 1/125 or 1/200 sec in X
mode.
Flash Contacts: X-sync contact. Directly coupled con-
tacts provided on accessory shoe.
All data based on Canon's Standard Test Method.
Subject to change without notice.
67