Canon imageCLASS MF4140 - FAX SETTINGS

12-8
Machine Settings
FAX SETTINGS (MF4140/MF4150 Only)
Setting Item Description
1 BASIC SETTINGS Registers your fax number, name, and country.
UNIT TELEPHONE # Registers your fax number. (See “Set the Machine for
Sending Faxes (MF4140/MF4150 Only),” in the Starter
Guide.)
UNIT NAME Registers your name/company name. (See “Set the
Machine for Sending Faxes (MF4140/MF4150 Only),” in the
Starter Guide.)
COUNTRY SELECT Registers your country.
TX TERMINAL ID Sets whether to show the sender information on each page
sent.
–ON*
–OFF
*When <ON> is set, the information registered in <UNIT
TELEPHONE #> and <UNIT NAME> are shown on each
page sent.
STANDARD SETTINGS Sets the default setting for faxing.
DENSITY Sets the default density for faxing. (1-9)
IMAGE QUALITY Sets the default image quality for faxing.
–STANDARD
–FINE
–PHOTO
– SUPER FINE