12-11
Machine Settings
RX RESTRICTION You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 1,
“Advanced Fax Features (MF4140/MF4150 Only),” in the
Advanced Guide.)
OFF All receptions are conducted.
ON Receives the fax only from the sending fax machine that
sends the TSI signal.
REMOTE RX Sets whether to use remote receiving. (See Chapter 1,
“Advanced Fax Features (MF4140/MF4150 Only),” in the
Advanced Guide.)
–ON
–OFF
4 PRINTER SETTINGS Sets the printer functions.
RX REDUCTION Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded. (See Chapter 1,
“Advanced Fax Features (MF4140/MF4150 Only),” in the
Advanced Guide.)
ON Reduces the image to fit on the size of paper loaded.
OFF Retains the original size of the image.
CUT The image that is larger than 1-page record area is cut and
not recorded.
CONT. PRINTING Sets whether to continue printing when toner has run out.
This function is only for Fax printing and printing reports.
(See Chapter 5, “Troubleshooting,” in the Advanced Guide.)
–OFF
–ON
FAX SETTINGS (MF4140/MF4150 Only)
To Next Page
Loading...
