2-2
Document Handling
● Do not place the document on the platen glass or in the ADF until the glue, ink or
correction fluid on the document is completely dry.
● Remove all fasteners (staples, paper clips, etc.) before loading the document in the
ADF.
● To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Carbon paper or carbon-backed paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Onion skin or thin paper
– Documents with staples or paper clips attached
– Paper printed with a thermal transfer printer
– Transparencies
To Next Page
Loading...
